Pre-engineered structural systems featuring heavy anti-corrosion finishes, certified to withstand up to 60m/s desert wind loads.
As Africa’s largest country by landmass, Algeria presents an extraordinary, dual-faceted environment for solar deployment. The Algerian government's ambitious national plan targets 15,000 MW of renewable power generation capacity by 2035. However, translating this mega-scale vision into structural reality requires engineering systems that can withstand some of the harshest conditions on Earth.
Industrial-scale solar sites in provinces like Adrar, Tamanrasset, and Illizi are exposed to extreme sandstorms (Sirocco winds), extreme thermal cycling (ranging from below 0°C at night to over 50°C during the day), and intense ultraviolet radiation. A solar mounting structure factory supplying this market must deliver metallurgical solutions that prevent structural failure, micro-cracks in PV modules, and premature galvanic corrosion.
Furthermore, urban coastal regions present high atmospheric salinity combined with humidity. This demanding geographical layout necessitates a diversified technology path: highly modular aluminum framing for C&I rooftops along the coast, and heavy-duty, hot-dip galvanized steel systems with custom foundations for the desert interior.
Sirocco sandstorms carry high mass and momentum. Our mounting structures are computed utilizing CFD (Computational Fluid Dynamics) simulations to satisfy local Algerian structural requirements (DTR) and Eurocode 1. Ground structures employ dynamic C-profile and H-profile steel columns driven to precise depths based on site-specific geotechnical pull-out tests.
Coastal projects in Algiers or Oran face corrosive maritime humidity (C4/C5 classification), while the southern desert introduces physical abrasion from blowing sand. We utilize ASTM A123 standard hot-dip galvanization with a minimum zinc coating thickness of 85 microns, or highly corrosion-resistant Magnelis / Zn-Al-Mg coatings.
The massive thermal gradient of the Sahara causes significant contraction and expansion in metallic structures. Our fixed and tracking mount systems integrate slotted connection holes, specialized expansion joints, and high-elasticity aluminum alloy clamps (6005-T5/T6) to prevent mechanical tension and module micro-fracturing.
While fixed-tilt configurations provide extreme mechanical reliability with zero moving parts—ideal for remote desert microgrids—single-axis tracking systems are increasingly utilized to optimize the Levelized Cost of Energy (LCOE) in northern utility scale stations. Jonas Energy engineering teams provide structural layout services to determine the optimal tilt angles (typically 25° to 34° for fixed-tilt systems in Algeria) to balance wind vulnerability and annual solar yield.
Get Engineering Project ConsultationA versatile selection of aluminum rails, high-profile steel sections, and specialized structures for varied application scenarios.
Xiamen Jonas Energy Co., Ltd. leverages Industry 4.0 automated production lines to satisfy the rigorous demand from Algeria's large utility projects. From automated roll-forming machines for C-channels to precision robotic welding and state-of-the-art hot-dip galvanizing lines, our systematic approach minimizes production tolerances and eliminates material wastage.
Quality assurance is embedded in every step of the process. In addition to ISO9001 and ISO14001 factory accreditations, our structures undergo tensile testing, salt spray corrosion test trials, and ultrasonic weld testing to verify complete mechanical reliability before shipment to major Algerian commercial harbors like Port of Algiers, Oran, and Skikda.
Navigating international supply chains for massive metal components demands absolute structural and logistic alignment. Jonas Energy ensures seamless coordination by managing freight forwarding pipelines, packing optimization (maximizing container volume utilization with custom steel crates), and generating certified documentation.
Our strategic partnerships with key raw material providers in China guarantee price stability for structural steel (Q235B, Q355B) and high-grade aluminum. Combined with our high-volume production facilities, we deliver stable lead times that allow Algerian engineering, procurement, and construction (EPC) firms to maintain strict compliance with project timelines.
Take a closer look at our rigorous manufacturing processes, executing precise engineering from raw steel to the finished certified product.
Successfully importing and utilizing structural equipment for national solar projects in Algeria requires alignment with several regulatory frameworks. The **Centre de Développement des Energies Renouvelables (CDER)** and the **Agence Nationale pour la Promotion et la Rationalisation de l'Utilisation de l'Energie (APRUE)** enforce rigorous compliance protocols.
Projects seeking national grid integration must provide comprehensive material test certifications, wind tunnel analysis reviews, and structural safety documentation. Jonas Energy structures are engineered in strict accordance with the following international and local paradigms:
By maintaining structured engineering documentation for all components, we facilitate smooth customs clearance at Algerian entries. This minimizes complex port logistics delays, ensuring that project contractors receive components exactly when needed on-site.
Xiamen Jonas Energy Co., Ltd. is a professional provider of renewable energy solutions, headquartered in Xiamen, Fujian Province, China. Since its establishment, the company has been dedicated to the research, development, manufacturing, and global distribution of advanced photovoltaic and energy storage products.
With a strong commitment to innovation and sustainability, Jonas Energy offers a comprehensive portfolio of solar energy solutions, including solar panels, inverters, energy storage batteries, mounting systems, and complete solar power generation systems. Our products are designed to meet the diverse needs of residential, commercial, industrial, and utility-scale projects worldwide.
We work closely with internationally recognized manufacturers and technology partners to provide a wide range of reliable energy storage solutions, including wall-mounted batteries, all-in-one storage systems, rack-mounted batteries, and containerized energy storage systems (ESS). Through continuous innovation and strategic partnerships, we help customers achieve greater energy independence and efficiency.
As a high-tech enterprise, Jonas Energy operates modern production facilities equipped with advanced manufacturing and testing equipment. Our annual production capacity reaches several gigawatts, enabling us to efficiently serve customers across global markets.
Our experienced R&D team consists of highly qualified engineers and technical specialists who continuously focus on product innovation, performance optimization, and technological advancement in the renewable energy sector. By integrating cutting-edge technologies, we ensure that our solutions remain competitive, efficient, and future-ready.
Comprehensive engineering insights regarding site preparation, material specification, logistics, and localized regulatory compliance.
For ground-mounted plants in dry, highly abrasive desert environments, we recommend Q355B structural carbon steel. Columns driven directly into the soil must feature a hot-dip galvanized layer compliant with ISO 1461, with a minimum thickness of 85 microns. If local soil reports show high acidity or salinity (common in closed salt lake regions or "chotts"), we recommend applying a polyurethane coal-tar epoxy coating to the driven section or implementing concrete pile footings.
Our engineering R&D department performs comprehensive finite element analysis (FEA) based on wind loads up to 60m/s. We optimize structural cross-bracing and use lock bolts that resist vibration. In sand-swept regions, structures are raised (typically 1 meter minimum ground clearance) to prevent wind-blown sand from accumulating beneath the modules, which could lead to structural overload and hot-spot failure.
Yes. International commercial banks and Algerian state buyers require comprehensive bankability reports. Jonas Energy provides detailed structural calculations, wind tunnel load coefficients, foundation pull-out capacity data, and structural calculation reports compiled via PVsyst and AutoCAD. These calculations are fully compliant with Eurocodes and Algerian DTR rules.
Standard manufacturing time for a 10MW utility project is 3 to 4 weeks. Shipping from Xiamen Port to major Algerian ports (e.g., Algiers, Oran, Bejaia, Skikda) takes approximately 35 to 45 days. We provide sea freight optimization services, loading materials into containers in pre-assembled, modular bundles to reduce labor costs and build time during on-site installation.
Engineered structural rails, heavy-duty C-channels, custom brackets, and modular building frames for regional energy projects.
Jonas Energy